BULK CUSTOM GOLF APPAREL
Waterproof Golf Pullovers
Estimated customization price:
-
For apparel brands, golf clubs and team programmes. Share a reference style, quantity and available specifications to start.
01 / MATERIALS & PERFORMANCE
Fabric Composition
Compare these blend options for your preferred fabric feel, stretch and care needs. The membrane, coating or backing is a separate part of the composite and is not included in the single-fiber percentages below. Final material specifications depend on the selected fabric.
| Shell blend | Suitable use | Tradeoff |
|---|---|---|
| 100% polyester | Cost-conscious team rainwear and stable shell panels | Less inherent stretch than an elastane blend |
| 100% nylon | Lightweight shells with a smooth, crisp fabric feel | May feel less forgiving during a full golf swing |
| 92% nylon / 8% elastane | Movement-focused athletic fit | Stretch can affect lamination, recovery and material cost |
| 92% polyester / 8% elastane | Flexible shell programs with a softer fabric feel | Requires compatibility review with the membrane and seam tape |
A separate 100% polyester or 100% nylon lining or backing can be considered where the selected construction needs it.
Fabric Weight
GSM means grams per square meter. Compare these complete composite fabric targets by the balance of packability, body and seasonal use. The listed composite weight includes the membrane and composite backing where applicable; an independent lining is counted separately.
| Composite weight | Fabric body and drape | Typical use |
|---|---|---|
| 120 g/m² | Light body with easy packability | Warmer-weather showers and travel shells |
| 150 g/m² | Light-to-medium body with balanced drape | General golf rainwear programs |
| 180 g/m² | More body and structure | Cooler conditions and frequent layering |
| 210 g/m² | Heavier body with a firmer drape | Cool-weather outer layers where packability is less important |
Independent lining or backing options can be evaluated at 50, 70 or 90 g/m². Weight alone does not establish waterproof performance; review the complete fabric and finished garment.
Fabric Construction
The supported construction direction is a laminated woven fabric with two-layer, two-and-a-half-layer or three-layer architecture. Two-layer construction commonly uses a face fabric and membrane with a separate lining or backing option. Two-and-a-half-layer and three-layer structures can reduce the need for a separate lining, but they change interior feel, weight and development requirements. Choose the structure with the required balance of packability, comfort and weather protection, then assess it in the garment sample.
Performance Features
- Water resistance: a laminated shell and suitable seam treatment can support rainwear development; the finished result depends on the complete garment structure.
- Breathability: a membrane selected for moisture vapor transfer may improve comfort, but the shell, openings and garment construction affect the result.
- Wind protection: a closely constructed shell and protected openings can reduce wind entry.
- Seam protection: seam sealing can address water paths at selected joins when the tape is compatible and applied correctly.
Define the relevant checks for the order, such as fabric water testing, seam-tape review and finished-garment rain evaluation.
02 / FIT, SIZING & COLOR
Fit Options
Choose a regular fit when the pullover must accommodate a golf polo or light mid-layer. An athletic fit reduces excess fabric but needs enough room through the chest, shoulders and upper arm for a full swing. Confirm sleeve length, body length, cuff opening and hem adjustment on the sample so weather coverage does not restrict movement.
Sizes
We can develop the base garment pattern against your size chart, with ranges such as XS–3XL evaluated to suit the program. Provide body measurements and intended layering use. Grading means adjusting the base pattern across sizes; review the graded sample or measurement set for chest, shoulder, sleeve and body-length changes before bulk production. Do not assume that every size follows the same movement or layering allowance.
Color Options
Black, navy, white and gray provide practical starting points for team and brand programs. Seasonal colors, contrast panels and Pantone-targeted dyeing can be evaluated against a color card. Confirm the shell, tape, zipper and trim colors together because different components may not match identically.
03 / GARMENT CONSTRUCTION
Construction concept / reference build.
Construction Details
The shell, membrane and seam treatment must work as one system. A two-layer, two-and-a-half-layer or three-layer laminated woven structure can be paired with selected seam tape, but the tape must suit the fabric surface and construction. A protected zipper or storm flap can reduce direct water entry at the opening, while an adjustable hem or cuff can help limit exposure during movement.
Inspect the inside of the sample for continuous, clean tape application at the specified seams, smooth transitions around corners and openings, and no tape lifting or exposed seam gaps.
04 / YOUR BRAND & PRODUCT SPECIFICATION
Logo Options
Decoration on a rain shell must protect the weather-resistant structure. Heat-applied or adhesive-based marks can be evaluated where their temperature and bonding requirements suit the shell, membrane and finish. Direct embroidery creates needle holes and may need separate sealing or reinforcement, so it is not a default choice. An applied patch also requires adhesive or attachment compatibility review. Place marks on stable panels away from critical seams, openings and areas that need continuous tape coverage.
Provide vector artwork where available, along with the intended logo size, placement and color references. We can use a sample to review edge definition, adhesion, needle-hole risk and comfort on the inside.
Customization Scope
Choose the garment changes that support your intended rainwear use. The final combination depends on the selected shell, membrane, tape and opening hardware.
| Area | Choices | Purpose |
|---|---|---|
| Opening | Protected partial zipper or storm-flap treatment | Helps limit direct water entry while preserving pullover ease |
| Seams | Selected seam-sealing coverage | Targets the seams most exposed to rain |
| Hem and cuffs | Clean finished or adjustable opening | Changes coverage, movement and adjustment |
| Body shape | Regular or athletic fit for layering | Balances underlayer space with a closer playing profile |
05 / ORDER & DEVELOPMENT PLANNING
Minimum Order Planning
Our minimum order quantity is 300 pieces. Send your preferred quantity and intended size and color breakdown so we can discuss the selected material, construction and order details.
Sample Lead Time
Sample lead time is 7–10 days. Use the sample to assess the selected fabric feel and weight, layering fit and movement, protected opening, seam-tape placement, and logo decoration compatibility. A sample review can also show whether the sleeve, hem and cuff adjustments provide the intended coverage.
Bulk Lead Time
Bulk production lead time is 15–30 days. Share your desired delivery schedule with the order quantity, selected fabric structure, colors, size plan and decoration details so we can review the production timing.
06 / APPROVAL & APPLICATION
Quality & Approval Checks
Use the selected fabric, size specification and sample details as references when agreeing quality requirements for this order.
| Quality point | Reference to compare | Why it matters |
|---|---|---|
| Material composition and GSM | Selected shell, membrane, backing and target weight | Confirms the ordered material basis and fabric body |
| Seam sealing | Approved sample inside view at joined seams and corners | Helps identify gaps, lifting tape or uneven application |
| Opening protection | Approved zipper, flap or opening construction | Checks coverage and smooth operation at the main water entry point |
| Garment measurements | Agreed size chart and approved sample | Controls layering room, sleeve length and body coverage |
| Decoration position | Approved artwork size and placement on the shell | Checks appearance without interfering with seams or weather-sensitive areas |
Suitable Bulk Buyers
- Golf apparel brands: develop a branded rainwear style with selected shell, opening and decoration details.
- Golf teams: coordinate practical outer layers with a clear size and color breakdown for players and staff.
- Golf clubs and event programs: balance weather coverage, logo placement and a repeatable club color direction.
Target Markets
For cooler, wet climates, review room for base layers, sleeve coverage and the balance between fabric weight and packability. For US, Canadian, UK, EU and Australian or New Zealand programs, provide the destination size chart, care-label language and any market-specific labeling requirements you need us to review.
What to Include in Your Enquiry
Send your reference style, order quantity, preferred size and color breakdown, logo artwork or initial idea, and desired delivery date. Please also identify whether seam sealing and protected openings are essential requirements.
Discuss Your Product Requirements
Share your reference style, estimated quantity, colors and available artwork. We can review a practical next step for your bulk project.